Shenzhen Optostar Optoelectronics Co. Ltd

Model Number: OP-350-1-#1732 Brand Name: OPTOSTAR Key Specifications/Special Features: Features:Core to core alignment by PAS technology(PAS: profile alignment system)Fiber core can be display clearlySingle X or Y view and X and Y view simultaneouslyAuto-check quality of cleaved end face

9 seconds splice time and 30 seconds heat time

Small bulk and lightweight

5.7-inch TFT color LCD monitor with clear digital image display

USB and VGA interface

Software upgrade via USB interface

Specifications:

• Applicable fibers: SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU-T G.653), NZDS (ITU-T G.655)
• Fiber count: single
• Cladding diameter: 80 to 150m
• Coating diameter: 100 to 1,000m
• Fiber cleaved length:
  • 8 to16mm with coating diameter of 250m or less
  • 16mm with coating diameter of 250 to 1,000m
  • Optional set-plate for 8 to 16mm with coating diameter of 250 to 1,000m is available
• Actual average splice loss:
  • 0.02dB with SM, 0.01dB with MM, 0.04dB with DS and 0.04dB with NZDS
  • Measured by cut-back method relevant to ITU-T and IEC standards
• Splicing time: typical 9 seconds
• Return loss: >60dB
• Splicing mode: 53 (template), 40 (user)
• Splice loss estimate: available
• Storage of splice result: the last 4,000 results to be stored in the Internal memory
• Fiber view and magnification:
  • 300x magnification for single X or Y vie
  • 150x magnification for X and Y view simultaneously, display direction can be changed
• Viewing method and display: two CMOS cameras and 5.7-inch color LCD monitor, fiber core can be displayed clearly
• Operating conditions: 0 to 5,000m above sea level, 0 to 95% RH and -10-50℃, respectively
• Tension test: 2N
• Electrode lifespan: 2,500 hours
• Tube heating mode: 9 (template), 24 (user)
• Tube heating time: typical 30 seconds
• Applicable protection sleeve length: 60, 40mm and a series of micro sleeves
• No. of splice/heating with battery: typical 150 cycles (splice/tube heat) with inner Li-battery
• Power supply: 100-240V AC with AC adapter; inner Li-battery (8,000mAh)
• Terminals: USB1.1 connector for PC communication, VGA connector for outer display
• Wind protection: maximum wind velocity of 15m/second
• Dimensions (L x W x H): 150 x 150 x 150mm
• Weight: 2.7kg excluding battery, 3.2kg including battery